Configuring the phone using the web interface

Last Updated : Apr 17, 2026 |
Prolog information
Metadata
Keywords:
To remotely access the phone configuration, you can use the web interface of the phone. You can use the Administration menu of the phone or the 46xxsettings.txt file to enable access to the web interface.
Other:
For security reasons, you must disable the access to the web interface when you are not using it.
From the phone web interface, you can view the status of the configurations, configure the parameters, and reset the values to default. The following are the tabs on the web interface of Avaya J100 Series IP Phones:
  • Status
  • Network
  • IP Configuration
  • QoS
  • Web Server
  • SIP
  • Settings
  • Date & Time
  • Management
  • Password
  • Debugging
  • Certificates
  • Environment Settings
  • Background and Screen Saver
  • Calendar
  • Multicast Paging
  • Key Configuration
  • Softkey Sets
  • Restart
  • Reset to Default
Note:
There are some parameters with an asterisk (*). If you configure these parameters and save, restart the phone after you log out of the web interface.
There are some parameters with two asterisk (**). If you configure these parameters and save, the phone restarts immediately.
The phone web interface displays a globe icon against the parameter last modified from the web interface.