With Server-initiated Update, you can get the notification from the SIP server if there are any available new settings or the phone firmware. If the file server has the requested files for update, the phone later applies new settings or, if available, updates the phone firmware.

By default, the Server-initiated Update feature is disabled. To enable this functionality, you must set the ENABLE_OOD_RESET_NOTIFY parameter to1in the 46xxsettings.txt file.

When the phone receives a SIP NOTIFY message about available updates, it checks the J100Supgrade.txt file and compares the firmware version it contains to the current firmware version. If the file server has a new firmware version, the phone reboots and upgrades to that version. If the firmware version stored on the file server and that of the phone match, the phone downloads the 46xxsettings.txt file to apply the new settings. In this case, it either logs out the current user or, if required, reboots. If there are any active calls or other transmissions, the phone will apply the new settings only when it becomes idle.

The date and time of the last update are displayed in the Status tab of the web interface.

You can get the notification from the SIP server by using either of the following: