Use the 46xxsettings.txt file to set the following parameters:
Parameter name
Default Value
Description
ENABLE_PRESENCE
Specifies whether the phone supports the Presence feature.
The following are the valid options:
Note:
In an IP Office and Open SIP environment, the phone sets this parameter to option
ALLOW_DND_SAC_LINK_CHANGE
0
Specifies if the user can change the DND and SAC button links. When you provide access to change the default behavior, the phone displays the menu on the phone screen to set the DND and SAC links.
The following are the valid options:
From the firmware version 4.0.8.0 and later, the phone does not support the parameter ALLOW_DND_SAC_LINK_CHANGE. Use the parameter DND_SAC_LINK instead.
AWAY_TIMER
Specifies whether the phone displays a presence-away state.
The following are the valid options:
AWAY_TIMER_VALUE
Specifies the duration in minutes where there is no user action on the phone. After this time, the phone displays a presence-away state.
You can set a value ranging between
The default value is 30 minutes.
PRESENCE_ACL_CONFIRM
Specifies whether to ignore the Presence Access Control List (ACL) update for the presence watchers whose approval is pending.
The following are the valid options:
The phone does not support this parameter in an IP Office environment.
DND_SAC_LINK
Specifies whether to activate the Send all call feature when the user enables the Do not disturb status.
Parameter DND_SAC_LINK is valid when you set the parameter ALLOW_DND_SAC_LINK_CHANGE to 0.
The following are the valid options:
Note:
Avaya J129 IP Phone does not support this parameter.
