Configuring Wi-Fi using phone UI

Last Updated : Apr 17, 2026 |
Prolog information
Metadata
Keywords:
Use this procedure to configure a Wi-Fi network by using phone UI. Note that switching networks causes a reboot of the phone.
  1. Navigate to Main MenuAdministration.
  2. In the Access code field, enter the administration password.
    ADDITIONAL INFORMATION:
    The default access code is 27238.
  3. Press Enter.
  4. Select Network interfaces.
  5. Use the right arrow key or Toggle soft key to change Network mode to Wi-Fi.
  6. Configure the following parameters:
    • Network config: Specifies if the WLAN is connected automatically or manually.
    • SSID: Specifies the network name for the WLAN you are using. Use the navigation key to select another SSID.
    • Wi-Fi networks: Displays available WLAN.
  7. Use the navigation key to select a WLAN, and press Connect.
  8. Press one of the following:
    • Save
    • Cancel
    • Change
Related information
Installing the wireless module
Accessing the Admin menu after log in