Configuring IPv6 from the phone menu

Last Updated : Apr 17, 2026 |
Prolog information
Metadata
Keywords:
Use this procedure to configure IPv6 addresses from the phone Ethernet IPv6 menu. In this menu, you can also view the phone IPv6 address, gateway address and prefixes if configured.
Note:
If you disable Use DHCP option, manual input mode will be enabled after rebooting the phone.
PREREQUISITE
Obtain the access code to Administration menu.
  1. On the phone, press Main Menu.
  2. Scroll to Administration, and press Select.
  3. In the Access code field, enter the administration password.
    ADDITIONAL INFORMATION:
    The default access code is 27238.
  4. Press Enter.
  5. Scroll to IP Configuration, and press Select.
  6. Scroll to Ethernet IPv6, and press Select.
  7. Do one of the following:
    • Configure as required Use DHCP(V6) or Use SLAAC fields by pressing Toggle.
    • Enter IPv6 addresses manually in Phone(v6) and Gateway(v6) fields.
  8. Press one of the following:
    • Save
    • OK
  9. Press Cancel to exit the menu without saving the changes.